Ring Problem

Hello, It might be your dialplan has something issue.Did you setup a ring group for the extensions?You should specify one or more extension(if possible) to receive the inbound calls. Can you post somehting CLI info when dialing?And what is your dialplan?

i] Last edited by Joe.Yung at 2010-2-12 10:30 [/i

you might have to close faxdetect , and also can try immediate=yes

Hi
Thanks for your reply

Original posted by Joe.Yung

Hello, It might be your dialplan has something issue.Did you setup a ring group for the extensions?You should specify one or more extension(if possible) to receive the inbound calls. Can you post some ..

No I have not setup any ring group extension!
In my inbound route, I have defined one extension (extension related to FXS), and I have not any problem in getting calls from PSTN, but my problem is, after 3,4 beep, my extension is ringing!!
Regarding to CLI info while dialing I attached to this topic as log.tar.

After 3,4 beep,"-- Starting simple switch on 'DAHDI/1-1'" is appeared, and then related extension is been ringing!
regarding dialplan, which content of file do I put here??

you might have to close faxdetect , and also can try immediate=yes

regarding "faxdetect",I have disabled that in chand_dahdi.
I have already set immediate to yes!!

Thanks for more help

what kind of device is connected to your FXO?

Original posted by miaolin at 2010-2-13 12:25

what kind of device is connected to your FXO?

Hi
But I do not understand your mean of this sentence!!
I have OpenVox A400P with FXO and FXS modules and I directly connected one PSTN line to FXO.

Thanks

Hi
I still wait for more help!

Thanks